Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 5000 charges a range of 12V batteries at a maximum charge rate of 5000mA (5Amps). The intelligent 8-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode – extending the life of the battery.

Compatible with WET/MF, AGM, GEL and LiFePO4 batteries, each charging program is tailored to the selected battery type. A desulfation stage repairs damaged batteries automatically during the charging profile, bringing them back to life (not LiFePO4).

Suitable for use in any environment, the Oximiser Pro's high impact, fire resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

The Oximiser Pro includes a set of cleverly designed 2-in-1 Croc-O-Ring leads, where each ring lead securely clips into a crocodile clip saving the need for two separate wiring harnesses and connects to the battery charger via an SAE connector.

Key Features

• Weatherproof IP65 rated - indoor and outdoor use

• 8 stage automatic charging: polarity test, analyse, desulfation (12V WET/MF, AGM, GEL), soft start mode, bulk mode, absorption mode, voltage check, maintain mode (float voltage)

• AH Capacity: 40AH - 120AH

• Compatible with: 12V WET/MF, AGM, GEL and LiFePO4 batteries

• Max output 5000mA

• LCD display: clear and easy to read battery charging information

• High impact, fire resistant ABS casing

• Rear fitted rubber feet for increased ventilation around the Oximiser casing

• Waterproof cable exit with cable strain relief

• Winter-grade cable

• Removable hanger: easy to use, clip in and turn to hold the hanger in place

• Includes set of Croc-O-Ring leads